Anycubic Photon Mono M5s 12k no-level resin printer: print like a master

New 3D printers are hitting the market on a regular basis, and more companies are joining the industry every year. With new products comes innovation, and innovation is always good for consumers because it gives 3D printers capabilities that seemed impossible a few years ago.


MUO VIDEO OF THE DAY

SCROLL TO CONTINUE WITH CONTENT

Anycubic has long been a pioneer in the field of 3D printing. This brand has launched a whole range of printers on the market, and the latest addition to the company’s resin-based range should impress. But what is the Anycubic Photon Mono M5 offer that other 3D printers cannot offer?


Anycubic Photon Mono M5s Key Hardware Features

anycubic photon mono m5s 3d print

As with any tech product, the Anycubic Photon Mono M5 comes with a long list of specs. This includes a range of key features that set the Photon Mono M5 apart from other 3D printers on the market.

3D printing without leveling

Bed leveling/tramming is one of the hardest things to master in 3D printing. Unlike other resin printers, the Anycubic Photon Mono M5s is the first of its kind to feature an automatic leveling-free system to keep your bed in the right place.

The Photon Mono M5s is the first consumer resin printer that uses mechanical sensors to detect and adjust the fit between the print platforms and the floating leveling module. This innovative design removes the need for manual leveling, making it beginner-friendly and helping to eliminate print failures.

12K resolution resin 3D printing

Despite its small size and desktop format, the Anycubic Photon Mono M5 is the first 3D printer of this size to feature a 10.1-inch monochrome LCD screen with a resolution of 11,520px x 5,120px. The result is incredibly accurate and detailed 3D printed models.

In fact, the Photon Mono M5s has a horizontal pixel size of 19μm and a contrast ratio of 480:1. This allows you to print details as fine as human hair while maintaining clear, well-defined edges.

3 times faster printing scheme

Slow print times are a major gripe for many 3D printer owners, but that won’t be the case with the Anycubic Photon Mono M5s. With print speeds of up to 105mm/hr, it’s one of the fastest desktop 3D printers on the market.

This speed is achieved through Anycubic’s specially formulated high-speed resin, with low viscosity and faster cure times. Combined with Anycubic’s upgraded Anycubic Photon Workshop 3.1, printing time can save up to 74%. At the same time, Anycubic has also developed a special mechanism for the Photon Mono M5s to ensure high success rates and print quality even at maximum speed.

The Photon Mono M5 adopts the 3rd generation release film which has less strength. This results in higher print success rates, reducing clearance height and increasing lift speed.

Automatic resin detection

No one likes failed 3D prints; they waste time, money and the materials you use. To help you, the Anycubic Photon Mono M5s has an automatic resin detection system that checks your resin vat before each print. If you do not have enough resin for your print, the printer will warn you before starting.

Intelligent hardware self-checks

Most 3D printers in the world have nothing in place to prevent them from working with faulty hardware, but the Anycubic Photon Mono M5 is different. This printer has an intelligent hardware self-check feature to test and troubleshoot problems with your printer.

This pretty much covers every aspect of the 3D printer. The exposure screen connection is tested, along with its motors and other components, with clear, easy-to-follow steps if you need to fix a problem.

Monitoring and analysis of 3D prints

Unlike other printers, the Photon Mono M5 monitors and analyzes each print as it is performed. The printer can detect and alert you to common issues that may impact your printing, as well as analyze the reasons for any failures that occur. This helps improve the quality of the prints you produce and make it easier to avoid problems with future prints.

Choose the Anycubic Photon Mono M5

Even though it has only just arrived on the market, it is safe to say that the Anycubic Photon Mono M5 will be a success. This printer works with a variety of resin types, has a high-precision laser cutting platform, and is one of the fastest resin 3D printers ever released. Unlike other resin printers, this option introduces zero upgrades to provide an enhanced user-friendly experience.

If that didn’t convince you, it’s worth checking out Anycubic’s website for more on the Photon Mono M5s. Many reviews and other information about this printer will be available on the web in the weeks and months to come, giving you the opportunity to learn more about this innovative 3D printer.

But if you can’t wait, you can get the Photon Mono M5s 3D printer starting at $399 in the US or €399 in Europe starting May 22, 2023 at 10:00 a.m. EDT. This fantastic pre-registration price will be valid for 3 days only. In addition, the first customers will have the chance to win free STLs. Just subscribe to Anycubic Store to know more.

This is a sponsored post. Product choices and opinions expressed in this article are by the sponsor and do not reflect the editorial direction of MakeUseOf or its staff.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *